旭崇 多工位ACF贴附(预贴)机 XCF77-A5

 文件下载    |      2019-08-18 20:21:12
旭崇 多工位ACF贴附(预贴)机 XCF77-A5

旭崇 多工位ACF贴附(预贴)机  XCF77-A5

Multi-station ACF Laminating M/C  XCF77-A5


Application:

本产品适用于各种液晶屏(LCD PANEL)、触摸功能玻璃(SENSOR GLASS)、硬质线路板(PCB, PCBA)、柔性线路板(FPC, COF)在COGFOGFOB等工艺中ACF贴着。

 

The machine is used for ACF laminating in COG, FOG, FOB process of various LCD PANEL, SENSOR GLASS and FPC, PCBA, COF, FPC.

 

Details:

人机操作界面  Operating Interface

静电去除机构   Group of Static Eliminating

操作控制按钮  Operating Buttons

压头机构      Group of Head

X-Y-Z轴机构   Group of X-Y-Z Axis

收料机构     Group of Waste Collecting

 

Introduction:

1 启动设备并调整相对应的参数。

2 相关参数设置完成,将需要贴附的产品放置移动平台。

3 启动真空,需要贴附的产品被真空牢固吸附在移动平台上。

4 人工确认真空吸附,按下双启动。

5 移动平台移至贴附刀头下方进行贴附。

6 贴附完成,刀头自动升起,平台复位。

 

1. Starting the machine and adjust the corresponding parameters.

2. Corresponding parameters setting finished, put product onto platform.

3. Press “vacuum” button, product is attached onto platform.

4. Confirm vacuum adsorption, then press double “start” button.

5. Platform moves to beneath the head and laminating.

6. Laminating finished, head raises automatically, platform go back to origin.

 

 

Parameters:

输入电源:AC220V ±20V 60HZ

Input Power: AC220V ±20V 60HZ

额定功率:1.8KW

Rated Power: 1.8KW

工作气压:0.4-0.8Mpa

Working Pressure: 0.4-0.8Mpa

安全防护:静电防护+漏电保护

Safety Protection: ESD protection + leakage protection

设备重量:180KG

Weight of Machine: 180KG

压头机构:气缸

Group of Head: Cylinder

LCD载台:X-Y电机驱动

LCD Platform: Driven by motor

程序控制:松下PLC

Controlling Program: Panasonic PLC

外型尺寸:L850*W1000*H1750mm(不含FFU)

Dimension: L1850*W1000*H1750MM (exclude FFU)

空气处理:油水气分离+过滤器过滤

Air Process: oil-water separation + filter

 

 

Features:

1 人机界面:便捷设定和显示各项参数,如平台进出速度,贴合时间等。

2 静电去除机构:可有效去除产品上产生的静电。

3 操作控制按钮:对常用功能使用按键操作,使用双启动开关,有效保护误操作启动。

4 压头机构:压头为长制刀头,压头水平局部可调。

5 X-Y-Z轴机构:X、Y伺服电机控制,位置、速度可设置;平台X轴运动时,Z轴可上下移动。

6 收料机构:生产贴附完成后的废料自动收集。

 

1. Operating interface is convenient to set and indicate all kinds of parameter, such as platform moving speed and laminating time.

2. Group of static eliminating can eliminate static efficiency.

3. Using button operation for common functions, and the ways of pressing double “start” button to operate can avoid operating in wrong ways.

4. The head is customized in a special size, and can be adjusted partly.

5. X, Y axis was controlled by servo motor that their position and speed can be set, Z axis can move up and down when platform moving in X axis direction.

6. Waste material is automatically taken away by the group of waste collecting after laminating finished.

 

Process:

偏光片  Polarizer

ACF贴附  ACF Laminating

 

Accessories:

无尘布  Dust-free Cloth

手套    Gloves

酒精    Ethanol

 

本文由http://www.my-progs.com/wenjianxiazai/224.html原创,转载请备注出处谢谢配合!

下一篇:驰速自动化五一放假公告上一篇:驰速自动化2019端午放假公告